03 - Quicker Steel Drilling

Discussion area for how we can learn from bad practice.
Post Reply
cross
Site Admin
Posts: 298
Joined: Thu Aug 30, 2007 9:38 am

03 - Quicker Steel Drilling

Post by cross » Thu Nov 15, 2007 11:47 am

http://www.dbp.org.uk/cs/DBP00070.pdf

A tool is only as good as the workman who uses it.

A simple change in the layout of holes, produced a significant time saving in the manufacturing process.

Do you understand your tools.

Is the design and manufacture process linked?

Chris Achilles
Posts: 147
Joined: Tue Sep 25, 2007 2:15 pm
Please enter the even number (3628): 9185
Location: BOLTON

Re: 03 - Quicker Steel Drilling

Post by Chris Achilles » Tue May 20, 2008 11:11 pm

cross wrote:http://www.dbp.org.uk/cs/DBP00070.pdf

A tool is only as good as the workman who uses it.

A simple change in the layout of holes, produced a significant time saving in the manufacturing process.

Do you understand your tools.

Is the design and manufacture process linked?
The biggest problem is designers and detailers have usualy spent little time on the shop floor. The old type of training with a few months in each department is invaluable. This seems to have died a death over the last decade because of commercial pressures!

Post Reply